Apium P220 Consumables

Apium P Series

Suitable for applications such as functional prototypes, end parts, jigs and fixtures, molds, etc.

Apium P series can print both pure PEEK (polyether ether ketone) with high crystalline precision and carbon fiber reinforced PEEK (polyether ether ketone) with up to 30% fiber.

APIUM PEEK 450 Natural
Apium PEEK (polyetheretherketone) is a semi-crystalline thermoplastic that is ideally suited for applications with thermal, chemical and mechanical specific conditions.
High mechanical strength
Good chemical resistance
High temperature resistant
Non-flammable
Lightweight
Excellent wear resistance
Good fatigue resistance
Color: natural/black/blue
Download parameter table (TDS)
Apium PEEK CFR
Apium PEEK CF30 is a reinforced PEEK containing 30% by weight carbon fibers. the addition of carbon fibers enhances the excellent material properties of PEEK. It has higher stiffness, better wear resistance and better temperature resistance than pure PEEK materials.
High stiffness
High heat resistance
High chemical resistance
Low warpage
Lightweight
High compressive strength
Easy to remove support
Color: Black
Download parameter table (TDS)
Apium PEEK GFR
Apium PEEK GFR (glass fiber reinforced) is a polymeric material that combines PEEK and glass fibers to provide excellent chemical and thermal resistance while balancing the high stiffness of glass. This combination results in printed parts with high dimensional stability and maintains the natural color aesthetics of PEEK.
High stiffness
High heat resistance
High chemical resistance
Low warpage
Small dimensional tolerance
Lightweight
Color: Natural

Download parameter table (TDS)
Apium PVDF
Apium PVDF (polyvinylidene fluoride) is a homopolymer with medium viscosity. Similar to other high-performance polymers, it is resistant to high temperatures and chemicals and is not affected by long-term exposure to UV radiation.
Chemical resistance
High temperature resistant
Barrier performance
Low flammability
High purity
Color: White
Download parameter table (TDS)
Apium PP
Apium PP (polypropylene) is a widely used thermoplastic polymer with chemical resistance and insulating properties.
High chemical resistance
Translucent
Warpage small
Insulation
Transmittance

Download parameter table (TDS)
APIUM PEI 9085 Natural
Apium PEI 9085 (polyetherimide) is an engineering plastic with high chemical resistance. It has similar properties to PEEK, but is relatively inexpensive, has low impact strength and low thermal resistance. The material is particularly attractive to the aircraft industry because of its flame retardancy.
High mechanical strength
Inherent flame retardancy
High dielectric strength
Heat resistance
Lightweight
Low smoke output
Download parameter table (TDS)

You May Be Interested In？

Apium P220
Apium P220 is a high-temperature 3D printer for printing high-performance polymers. For PEEK, PEI ULTEM™ and other high-performance materials, the P220 provides better adaptive heating management of temperature during printing.
More
Apium P400
Apium P400 is a high temperature 3D printer with IDEX independent dual nozzle multi-material system. Aiming at PEEK, PEI ULTEM™ and other high performance materials, the ZoneHeating intelligent temperature control system of P400 can better self-adapt the temperature management in the printing process.
More
Apium M220 3D Printing Consumables
Apium M220 commonly used printing materials for VESTAKEEP® i4 3DF, VESTAKEEP® i4 3DF-T, etc. Medical PEEK materials have good biocompatibility, this type of filament can be used for scientific research, development, process optimization and permanent implantation of medical device design.
More